Is the screw of Tianzhu tightening wheel removed clockwise?

NO. 1 Find the correct position when using the jack, and don't lift the car body too quickly when using the jack, so as to avoid the dangerous situation that the vehicle will slip off the jack due to unstable support. Recently, there have been many accidents due to improper placement of jacks. That exhausted man must eat snacks for a long time! ) NO.2 remove the screw diagonally; In this way, the stress of the tire will not be concentrated when unloading, which is labor-saving and less screw wear. NO.3 Do not pull out the screws after unloading; About a finger away. After all the screws are removed, all the bolts can be loosened and pulled out. No.4 is arranged in a row, and the first screw is marked, so that the original parts can be disassembled in the right order, so that the screws will be less worn! Fifth, make sure that the spare tire is aligned with the wheel fixing screws. Tighten No.6 in diagonal order to ensure that the screws are uniformly stressed. NO.7 when tightening screws, bolts and nuts of different specifications and grades have specified torque range values, so they must be tightened according to the grades of bolts. If there is no torsion plate, listen to the master and continue to twist 15-30 degrees after the initial twisting.