What accessories does the spray fan consist of?

The spray fan consists of a fan motor, a water pump, a pillar, a base, a water tank and a centrifugal atomizing disc. Installation method of the spray fan:

★ Installation of a square bar: put the bottom of the square bar on the base and tighten the screws from above.

★ Install the motor: insert the connector of the motor on the connector of the square bar, straighten the direction of the motor, and then tighten the screw.

★ Install the mesh cover, atomizing disc and fan blades: remove the screws on the motor head, align the rear fan cover with the motor mounting hole, tighten the screws, then install the fan blades on the motor shaft, tighten the fan blades with the motor shaft gap, install a batch of atomizing discs on the front fan cover on the mounting hole, and then fasten the front fan cover on the rear fan cover.

★ Installation of spray fan motor line source: the motor power cord (three holes) is inserted into the three-hole socket behind the square pole.

★ Installation of water pipe of centrifugal atomizing fan: insert 8MM water pipe into atomizing disc and connect it quickly, install the water pipe, and the motor of atomizing disc will be natural. Insert the motor plug (four holes) of spray tray into the corresponding socket, insert 6MM and 8MM water pipes into the quick connector respectively, and put on bellows.

★ installation of water tank: install 4 casters on the base, put the water tank on the cart, put a water pump in the water tank and plug in the water outlet pipe. The water pump power cord and water outlet pipe pass through the water tank hole and are inserted into the corresponding hole.

Dongguan Sprite spray fan provides installation methods.