What happens if salt is added to the oil?

It will accelerate the wear of internal parts and may cause corrosion. When salt is put into the oil tank, it corrodes, and salt corrodes. It will corrode the parts and oil circuits in the engine and reduce the lubrication performance! Increase the internal wear of the engine.

Hazards of using inferior engine oil:

1, high sulfur content: it destroys the quality of engine oil, reduces the performance of engine oil prematurely, and prevents the engine from being well lubricated.

2. The low calorific value cannot reach the specified value: the fuel consumption rate is higher than the rated power of the calibrated engine.

3. High carbon deposit: excessive carbon deposit is generated during combustion, which affects the combustion effect of the engine. The high temperature of combustion chamber will lead to the early damage of piston, piston ring and cylinder liner.

4, high water content: damage to the lubrication of fuel pump and nozzle precision parts.

Extended data

Engine maintenance skills:

1, clean the air filter

The air filter is directly related to the air intake of the engine when the car is running. The manager of Guangben dealership told the reporter that the air filter will not be blocked when the car is only driving in the urban area, but if the car is driving on dusty roads, it is necessary to pay special attention to the cleanliness of the air filter.

2. Remove throttling sludge

There are many reasons for fouling at the throttle, some of which are carbon deposits formed by the exhaust gas from fuel combustion at the throttle; Then, impurities that are not filtered by the air cleaner will remain on the throttle. Too much sludge will cause air resistance and increase fuel consumption.

3, clean up the nozzle carbon deposit

Because the combustion chamber is easy to produce carbon deposit, it is difficult to start; Carbon deposition in the fuel nozzle will also lead to oil blockage, gasoline injection deformation, poor atomization, and fuel consumption will naturally increase.

For the cleaning of the combustion chamber, a special carbon remover can be used to soften the carbon deposits on the combustion chamber and the fuel nozzle and separate them from the surface of the parts, and then remove the softened carbon deposits. This method of carbon removal works well. Compared with the previous direct wiping, it has the advantage of no damage to the surface of parts and greatly improves the carbon removal efficiency.

References:

Baidu encyclopedia-engine oil

References:

Baidu encyclopedia-engine