What is the function of booster pump? Where is the appropriate installation?

The so-called booster pump is installed on the main tap water pipeline, which means that the booster pump we installed can meet the pressurization needs of various positions in our room. However, due to the wide range of pressurization, the possible increase effect is not particularly obvious. Pressurize all indoor facilities. It is a good location to install the booster pump in the water meter pipeline well (it can be a well on the first floor or a well in the corridor), because installing it at this location can first ensure that the water pipe can boost the pressure from the back of the water meter.

Therefore, it is recommended that you install a non-negative pressure pressurization system to eliminate the inconvenience caused by negative pressure to other households. When installing, it is best to install it behind the main water inlet valve, install valves before and after the pump, and set up a bypass water pipe to facilitate the domestic water for later maintenance of the pump, which should be determined according to the convenience and rationality of use. If it is only used to increase the outlet pressure of the water heater, it can be installed near or on the side of the water heater inlet and connected with a hose, which is convenient to use and can prevent water from splashing out in the shower.

First of all, the noise problem. Although all the booster pumps bought are silent pumps, there are very few booster pumps that can really be silent (although there are, they are very expensive). In the dead of night, as long as someone uses water in your company, the booster pump will start working, preferably indoors in your home, so as not to disturb other neighbors at first, and you will be the first to find out whether there is water leakage. Now many properties are not allowed to install booster pumps privately, so it is safer to install them indoors.

Submersible pump is a kind of motor that completely submerges the pump in water to provide water pressure. Water pump is a kind of machine that puts the pump body in a dry place to extract groundwater or pipeline water. The working pressure range of booster pump is large, so different pressure regions can be obtained by selecting different types of pumps, so that the input air pressure and output air pressure can be adjusted. Can reach extremely high pressure, gas 90Mpa. The flow range is wide, and all types of pumps can work smoothly with only 0. 1Kg air pressure.