How to remove the axle head screw of the rear wheel of MG Ruiteng?

Remove the tire. You can see the car brake disc and caliper when you remove the tire. Only when they are removed can the front wheel bearings be seen and the bearing fastening nuts be removed. Remove the dust cover outside the bearing with an opening, and you can see the big nut that fixes the bearing. Remove the nut with a 30 socket.

Remove the brake caliper. Use a 18 ring wrench to remove the two screws fixing the brake caliper, and then slowly remove the brake caliper to prevent the brake pipe from breaking. Remove the brake disc. Remove the brake disc from the outside. If the brake disc can't be disassembled, you can screw two screws to the hole of the brake disc, and then tighten the screws with the corresponding wrench to disassemble the brake disc.

Front wheel axle head screw The front wheel axle screw is used to adjust the clearance of the front wheel bearing and fix the function of the front wheel bearing. If it is too tight and the clearance of the front wheel bearing is too small, it will lead to bearing wear and temperature rise, and the lubricating oil will melt seriously, which will lead to bearing burning and accidents. Therefore, do not tighten the front axle screws too tightly. Tighten it, then loosen it by a quarter turn to leave a gap for the bearing.