How to disassemble Geely Bo Yue warm air small water tank?

1. There is a fixed line behind the workbench, and the wiper motor should also be removed. The three bolts fixing the workbench in the water storage tank have all been removed.

2. Remove the heating water pipe connector and the fixed cover plate connecting the heating water tank. There are two bolts on the firewall to fix the bellows system in the car respectively, and they should be removed together at this time.

3. Remove the two bolts at both ends of the internal workbench, and then remove the fuse box guard, steering wheel guard, instrument panel and housing in turn.

4. Remove the cassette player, ashtray, tuyere, fixed frame and sundry box in front of the co-pilot, and remove the screws connecting the workbench inside.

5. Remove the headlight switch and wiper switch, and remove the steering wheel fixing wire and two screws for fixing the workbench. At the same time, remove the decorative plates on the left and right sides of the steering wheel and unplug the switch plug.

6. After all the screws on the workbench are removed, hold the wire harness and pull the workbench outward. Make sure that the left and right forces are balanced, and then take out the workbench.

7. Remove the wire harness fixing wire on the bellows assembly, unplug the plug that gets in the way, remove the three fixing wires on the bellows assembly, and gently shake it to the left to take out the heating mechanism assembly.

8. Remove the old heater water tank and replace it with a new one, and the removal process is completed.