What are the basic rules for suspended ceilings?

Step 1:

Construction preparation; mainly preparing: aluminum alloy square plates, keels, booms and other materials. Impact drills, toothless saws, hacksaws, nail guns, screwdrivers, wire hammers, squares and other construction tools.

Step 2:

Basic layer elastic line; after preparing the basic materials, first we need to find the center of the room to be decorated according to the elevation of the decoration floor and the designed elevation. point, and draw the keel position line on the wall along the elevation level of the entire ceiling, with the center point of the room as the center.

Step 3:

Install the main keel ceiling; after drawing the ceiling elevation line and the keel position line, we start to determine the elevation of the lower end of the boom, and then install the processed For a good suspended ceiling, the installation of the suspended ceiling needs to be fixed on the ceiling with expansion bolts. The first is to install the main keel. The main keel is generally made of C38 light steel keel, and the spacing is controlled within the range of 1200mm. During installation, the suspended ceiling and boom connected with the main keel are used. The second step is to install the side keel.

Use cement nails to fix 25*25mm painted keels around the wall in accordance with the ceiling net height requirements. The spacing between cement nails should not exceed 300mm. Then install the sub-keels. The sub keel is hung on the main keel through the hanging piece. When the length of the sub keel needs to be extended by multiple keels, use the sub keel connector to connect the opposite ends while hanging the sub keel, and straighten them first. fixed.

Step 4:

Install the metal plate; after the keel, side keel and sub-keel are installed, we need to set up a strip in the middle of the assembly area along the direction of the vertical sub-keel baseline, then align the baseline and install to both sides. During the installation process, be careful to handle it with care. At the same time, you must gently press the two sides of the square plate along the flanging part in order, snap it into the keel, and then push it tightly.

Step 5:

Cleaning; after the aluminum gusset plate is installed, the entire surface of the plate needs to be wiped clean with a cloth, and there should be no dirt, fingerprints, etc.

Home decoration ceiling is a common link in home decoration. Suspended ceilings are classified differently depending on the material of the decorative panels. Ceiling decoration materials are the main basis for distinguishing the names of suspended ceilings. They mainly include: light steel keel gypsum board ceiling, gypsum board ceiling, mineral wool board ceiling, plywood ceiling, special-shaped long aluminum gusset ceiling, square painted aluminum gusset ceiling, painted Glass ceiling, aluminum honeycomb perforated sound-absorbing panel ceiling, duplex ceiling of the whole house, etc.

It occupies a very important position in the entire bedroom decoration. Proper decoration of the top surface of the bedroom can not only beautify the indoor environment, but also create a colorful indoor space artistic image. When choosing ceiling decoration materials and design solutions, we must follow the principles of being material-saving, strong, safe, beautiful, and practical.