Causes of heat leakage of wall-hung boiler in high temperature weather

Water leakage of wall-hung boiler is one of the common faults in use. When the weather is hot, there may be some water leakage problems in the heating. There are several possible reasons:

1. The furnace body is not fully sealed. If the furnace body is not sealed enough, it is easy to be corroded by external moisture, resulting in water leakage.

2. The water pressure is too high or too low. The water pressure of the wall-hung boiler should be adjusted before use. Water pressure is too high or too low, which may lead to water leakage in the furnace water pipe.

3. The water pump leaks. The wall-hung boiler needs water pump to heat it. If the water pump itself leaks, it may cause water leakage.

4. The pipeline is aged or damaged. The heating pipeline of wall-hung boiler may be aging or damaged, especially if it is used for a long time, which will aggravate the aging and damage of the pipeline and may lead to water leakage.

5. Improper installation. If the wall-hung boiler is improperly installed and the pipe connection is not tight, it may lead to water leakage. In addition, if the safety valve is not installed correctly during installation, the furnace body will also leak water.

In short, the above is the reason why wall-hung boiler heating may lead to water leakage. Pay attention when using. If there is such a problem in the wall-hung boiler, it should be checked and handled in time to avoid affecting the heating effect and safety.