How to wax floor tiles and the precautions for waxing
If you want to maintain the beauty of your living room floor, a regularly waxed floor is a good choice. So what should you pay attention to when waxing floor tiles? What are the methods of operation? ?1. Method for waxing floor tiles 1. Choose a sunny waxing weather
When waxing floor tiles, the wax will harden when the ambient temperature is lower than 5 degrees. Do not clean the floor with a chemical-containing rag before waxing as this will cause the floor wax to have poor adhesion.
2. Remove garbage and dirt from the floor surface.
Waxing floor tiles uses a vacuum cleaner to remove dirt and dust from the floor surface. If it is difficult to remove, you can wash it with water. use.
3. Clean with drainage cloth.
Wipe with a wrung-out cloth. The floor surface, especially the grooves, should be cleaned carefully without leaving any cleaning agent behind. As residual detergent and moisture, it causes the surface to whiten and swell.
4. Complete drying
The moisture on the floor surface and grooves must be completely dried for waxing. The time required will vary depending on the season, but will take approximately half a day. If it is not completely dry, the wax will not adhere to the floor surface, affecting the appearance and whitening.
5. Hair removal method
Waxing floor tiles Shake the container containing the wax plate and mix it thoroughly. Before cleaning the entire floor of a room, to prevent floor wax from contaminating dado and furniture, cover the front with masking tape. Use a clean cloth to completely submerge the wax on the plate without letting it drip. 2. Precautions for waxing floor tiles 1. Choose good weather for hair removal
In fact, the time for waxing the floor is also very important. It is generally recommended to do it when the weather is good. Be sure not to choose high humidity and low temperature construction on rainy days, because if the humidity is too high, it will easily cause white turbidity, and if the temperature is too low, the wax will easily harden, resulting in poor adhesion of the floor wax.
2. Clean the floor surface.
Waxing floor tiles Before waxing the floor, be sure to clean the dust and debris on the surface, otherwise it will affect the overall aesthetics. It is recommended to use a vacuum cleaner to clean dust and other materials before waxing.
3. The floor must be completely dry
If the wooden floor is stained, it can be cleaned with a soft cloth. Let it dry before waxing, especially on the recessed areas of the floor. If it is not completely dry, it will not only have poor adhesion, but also affect its appearance. ? 4. Be careful when removing hair
When mixing wax for floor tile waxing, shake it thoroughly. Do not pour floor wax directly on the wooden floor, otherwise it will leave marks and rings. It should be used carefully according to the grain direction of the floor, and the thickness should be uniform, otherwise it will affect the appearance.
5. Do not walk through the wax before drying
After the floor tiles are waxed, walking on the ground is not allowed immediately. It should be left to dry for about 2-3 hours.