Where is the Volkswagen Bora sensor?

The ambient temperature sensor is usually located next to the front fog lamp. The positions of Bora's main sensors are as follows: 1. Oxygen sensor: the oxygen sensor is installed on the exhaust pipe to monitor the combusted gas and judge whether the engine is fully burned and whether the mixing degree is too thin or too rich; 2. Wheel speed sensor: it mainly collects the rotating speed of the car to judge whether the car is slipping. Therefore, there are sensors specially used to collect the wheel speed of the car to complete this work, which are generally installed on the hub of each wheel. Once the sensor is damaged, ABS will fail; 3. Water temperature sensor: The water temperature sensor is installed next to the thermostat and converts the temperature of cooling water into an electrical signal. Increase fuel injection quantity or ignition advance angle at low temperature, prevent explosion at high temperature and delay ignition advance angle; 4. Intake pressure sensor: generally installed on the throttle. As the name implies, the intake pressure sensor senses a series of resistance and pressure changes with the change of engine speed and load, and converts them into voltage signals for ECU to correct fuel injection quantity and ignition timing angle. Bora crankshaft position sensor is close to the engine starter.