Where is the accelerator of Geely Binrui? How often does Binrui throttle clean?

202 1 binrui throttle valve is located at the engine intake, behind the engine air filter and in front of the intake manifold. As shown in the figure below.

1 wiper water

2 storage battery

3 Throttle

4 oxygen sensor

5 Brake tank

6 fuse box

7 Air cleaner element

8 Coolant tank

How often does Binrui throttle clean?

Generally, the Binrui throttle is cleaned once when driving for about 20-30 thousand kilometers. If it is not very dirty, the cleaning method can also be used to clean the throttle directly with cleaning agent without disassembling the throttle. But it will be cleaner to remove the throttle and clean it. The cleaning steps for removing the throttle valve are as follows:

1, find the throttle position and connect it to the air filter just behind the air inlet;

2. Remove the hose connecting the throttle valve and the air cleaner first, and then remove the air cleaner assembly;

3. Then, remove the throttle cable, unscrew the fixing bolt and remove the throttle;

4. Use special cleaning agent or carburetor cleaning agent, spray a little cleaning agent on the throttle, wait for the organic solvent to dissolve the carbon deposit, and clean the stain after 1-2 minutes.

In addition, it can be cleaned without disassembling the throttle, and the cleaning agent can be directly injected into the throttle when the engine is running. The practice of most 4S shops and maintenance points is to blow the throttle while injecting cleaning agent into the throttle. At this time, the car will emit white smoke, mainly because the cleaned dirt is sucked into the cylinder and ignited, and then discharged. This kind of cleaning method is very harmful to the car. Generally, it will be better to disassemble and clean, and it will not cause too much damage to the car.