How to use the water distributor

The principle is as follows: an organic solvent and water are not miscible at room temperature, but can form a boiling substance with a density smaller than that of water. The most common one is toluene. When the water separator is filled with solvent, The solvent and water are stratified in the water separator, water accumulates in the lower part of the water separator, and the solvent flows back into the reaction system. In fact, there are two core points: it is not miscible with water and is less dense than water.

Extended information:

Subject content and scope of application This standard specifies the performance requirements and test methods of water distributors. This standard applies to water distributors used for laying fire hoses. The water distributor is a fire-fighting equipment that separates the hose branch line from the main hose line. Each water distributor has a water inlet and several water outlets.

The computer room auxiliary equipment plays a major auxiliary role in the design and operation of the computer room to ensure the normal operation of the computer room. It mainly consists of constant pressure device, water processor, water softener, filter, water tank, balance valve and other equipment. 1 Selection guide for constant pressure devices; 2 Selection guide for electronic water processors; 3 Selection guide for water softeners.

Technical parameters of the water distributor: the diameter and length of the water distributor, the number and size of the water inlets and outlets of the water distributor, the working pressure of the water distributor, and the material of the water distributor

The water distributor plays the role of diverting flow. 1. When there are many pipelines, if too many tees, four-way and other accessories are used, the energy loss of the system will be great. 2. It is convenient for users to operate. When the water distributor is used, the pipeline direction is clear and easy to operate. 3. Convenient for maintenance. The interfaces on the water distributor are all flange-connected. It can be said that the purpose is to facilitate disassembly and maintenance. 4. Reduce system pressure difference.

Water distributor structure: Generally, the water distributor is mainly composed of three parts: a water distributor, a water collector and a fixed bracket. The function of the water distributor is to separately introduce the hot water from the heat source into the pipes laid by each floor radiant heating to achieve the purpose of room heating and temperature adjustment. The water collector collects the low-temperature water in each channel after separate heat dissipation and fixes it to the wall or the ground.

Baidu Encyclopedia-Water Divider