Where is Mitsubishi Pajero sensor?

The main sensor positions of Pajero are as follows: 1. Oxygen sensor: installed on the exhaust pipe to monitor the gas after combustion. By judging whether the engine is fully burned and whether the mixing degree is too lean or too rich, the fuel mixing ratio can be effectively adjusted to ensure the normal operation of the engine. 2. Wheel speed sensor: mainly used to collect vehicle speed. Mounted on the hub of each wheel. When the sensor is found to be damaged, the ABS system will fail, so its role is very important. 3. Water temperature sensor: installed next to the thermostat. By converting the temperature of cooling water into an electrical signal, the fuel injection amount or ignition advance angle can be increased at low temperature, and explosion and ignition advance angle can be prevented at high temperature. 4. Intake pressure sensor: generally installed on the throttle. When the engine speed and load change, the intake pressure sensor senses the corresponding resistance and pressure changes and converts them into voltage signals for ECU (engine control unit) to correct the fuel injection quantity and ignition timing angle.