Install the door or floor first.

Usually, the door is installed before the floor is laid. 1. From the point of view of installation coordination, the skirting line of the floor is more convenient after the door cover is installed, and there is no need to worry about the ending of the skirting line; 2. From the point of view of finished product protection, it is easier to protect the finished product, especially the floor, to avoid the dripping of styrofoam and the pollution of glass glue and sawdust from damaging the floor. Moreover, some doors are relatively heavy, and it is easy to damage the floor and scratch the floor when installing, so it is best to install the doors first.

What should I pay attention to when paving the floor?

1, laying process

Laying the floor is not that simple, it needs many processes. For example, when laying the ground keel, sprinkle some peppers to prevent the floor from being eaten by insects. Then spread the moisture-proof film, then spread the floor keel, and finally formally spread the floor, so when laying the floor, these processes must be done well to prolong the service life of the floor.

2, the ground is dry

Before laying the floor, it is necessary to treat the ground base to make the ground clean and tidy. In addition, it is necessary to ensure that the ground is flat, so as to facilitate the smooth development of floor laying work.

Step 3 dry the floor

No matter what kind of flooring product, the raw material is wood, which is easily affected by the weather, causing the problem of thermal expansion and cold contraction. Therefore, after the floor is purchased, it must be fully dried, so that the moisture contained in the floor is equal to the moisture in the indoor space, which is convenient for laying.

4. Reserved gap

The floor is made of natural wood, which tends to expand with heat and contract with cold under the action of weather. Therefore, when laying the floor, we should pay attention to the reserved gap of the floor to avoid the problem of cracking and deformation.

5. Laying direction

Before laying the floor, it is necessary to roughly determine the laying direction of the floor. It is suggested to lay the floor from a corner of the space. When laying, the first layer should be laid with a certain space reserved with the wall, and then the second layer should be close to it.