What happened to the automatic wire cutting tin dipping machine?
Scrape tin out of the tin bath when scraping tin.
Solution: The reason is that the speed of the tin scraping manipulator is too fast. There is a throttle valve at the tail of the tin scraping cylinder to control the air pressure to make it fast or slow.
2. There is no tin on the thread.
Treatment: Check whether the nozzle is dipped in tin. If so, check whether the thread nozzle is immersed in the defense aid. If the thread mouth is not immersed in the defense aid, it will not be stained with tin. At this time, adjust the defense auxiliary tank to the position where the wire mouth can be dipped in tin.
3. The tin furnace does not scrape tin.
Treatment: Tin ash should be cleaned once a day. There are differences in tin quality, and some tin produces too much tin ash, which will lead to poor tin scraping or no tin scraping. Because the tin ash blocks the stroke, it is necessary to clean up too much tin ash in time to make the stroke of the tin scraping clip smooth.
More information can be downloaded from Baidu. We have a professional operation manual. Please accept the answer. thank you