China Naming Network - Almanac query - How to install HNA Mazda 323 water tank fan

How to install HNA Mazda 323 water tank fan

Installation method of fan for water tank of Hainan Mazda 323;

1. Install the water-cooled fan main engine in the upwind position of the building.

2. Install a special forced exhaust fan, and the exhaust air volume shall ensure that it reaches more than 70% of the total supply air volume of the water-cooled fan.

3. The main engine must be installed horizontally as a whole, and strong typhoon prevention measures should be taken. The mounting bracket must be able to bear the dynamic load greater than 250kg, and the mounting bracket above 3 meters from the ground should be equipped with guardrail. Try to use tap water for water intake, and the water quality must be kept clean. If the water quality is good, it should be filtered and softened by a water purifier, and the drain pipe should be connected to the sewer to keep it open.

4. Ensure that the installation frame structure can support the weight of the whole water-cooled fan host, air duct and installation personnel more than twice, so as to ensure the safety of engineering and use.

5. The tuyere is set above the personnel post, and the specification and size of the tuyere can be selected according to the wind pressure, air volume and air supply angle. The tuyere with air distributor is convenient to adjust the air volume and realize the balance of wind speed and air volume of each tuyere.

6. The specification of air duct is generally designed by rated flow method. The wind speed of the main duct is 8 ~10m/s, and the wind speed of the final duct is1.5 ~ 2m/s. ..