Install the toilet inlet valve?

1. First, turn the valve body of the water inlet valve counterclockwise and take it out. Then unscrew the nut to be installed, and remember to take out the gasket inside the nut. 2. Find the position of the drain hole on the water tank and install the drain head at this position. After installation, adjust the position of the drain head to match the drain hole. Then take out the washer sleeve and tighten the nut without any looseness. 3. Find the hole of the drain head, fix the button of the valve body on it, and rotate the valve body clockwise. If you hear a click sound during the rotation, it means that it has been installed in place, and finally tighten the nut.

/

Related knowledge science:

1, the toilet inlet valve can adjust the water volume and plays an important role. If you want to adjust the water quantity, just move the drain valve up and down. If you want to make the displacement smaller, raise the position of the valve body; otherwise, if you want to make the displacement larger, lower the position of the valve body.

2. When using the toilet in daily life, if you want to increase the displacement, just adjust the valve. The sealing hole can be moved downward, so that the water displacement will increase. On the other hand, if you want to increase the displacement, just move the sealing hole upward.

3. The toilet water inlet valve plays a key role, and it must be installed in place when installing.