New year lottery wall

The use of wall gouging, the owner's previous gouging treatment is to gouge multiple holes in the wall, because the wall is uneven. Tiles help to absorb the cement layer. Things here use this process, and the wall that is chiseled out has many scratches on the wall, so it is randomly drawn. Our goal is to increase the absorption of cement layer. Perhaps this is the owner of snow and many friends. This waterfall feels like it, but it doesn't make much sense. In fact, the owner also thinks so.

Because the wall must be leveled when decorating, the more uneven the wall is when scraping, the better the cement adsorption will be, and there will be no cracks. Finally, make a tile to prevent falling off. If you can't hear them, it's not easy to remove them, but this method adds a little fence. The use of wall roughening is relatively thick, but the advantages outweigh the disadvantages, so it is still very beneficial.

The purpose of wall roughening is that the wall is uneven and tiles can be installed, but the tiles will be more effective after leveling, as the master said. If only the wall were 2 cm big. This method is certainly worth learning. Of course, some masters used professional tile adhesives to save space during construction. This is possible, but the cost is higher. It can be decided according to the actual situation. Digging the wall is used to rebuild the home, because the first step is to shovel the ash from the original white wall, because the quality of the white material is very good. If it is not a shovel, it will be provided later. The use of wall roughening and the effect of latex paint are effective. But what I didn't expect was that when the owner had white ashes, he must be relatively poor, separated from the wall of my house. He said, otherwise it will affect the wall work in the future. I think this is a very simple project. The use of wall roughening can be seen at the scene, which is the so-called roughening process of cutting the wall into holes and holes. According to the owner's reason, it is to draw a hard object on the wall, and the cement ratio may not be standard. In the original building, it was said that the concrete floor on the outer wall of the house was loose, and I would knock on the door. The advantage of using wall roughening is that engineers can master the increase of adsorption capacity of mending agent layer within five days and avoid the problem of peeling putty layer.

Although technically speaking, it is more difficult to handle the chisel with an electric shovel than it is on the lime and wall, so we can see that it is ok to drill many holes and it is relatively flat after installation. In the above circumstances, I think the host is in the station. First of all, the roughening treatment is usually only carried out when building walls. It's not witchcraft to finish chiseling, but it can only be bound after the problem of putty bombardment can be solved. If the wall base is poor, the usual practice is to leave white material in the cement layer and erase the interface. So when you are refitting, you should pay attention to this situation.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~