How to make a self-made drain rack for tableware
First of all, branches are made by hand to drain water.
1. Preparation materials: branches, electric drills, chisels, axes, sandpaper, etc.
2. Prepare about 10, which can be increased or decreased as needed. First, peel off twigs and polish them with sandpaper.
3. Saw two logs as the base of tableware drainage rack, and chisel out square holes of 1.5cm× 1.0cm at both ends of the logs.
4. Take two slightly thinner logs, mark them about 1.5cm from the end, saw them, and assemble them into a square frame.
5. Drill a hole every 5cm on the thick log with an electric drill, then sharpen one end of the polished branch, insert it into the drilled hole, and glue it with white latex if it is not strong enough.
6. Just polish the details.
2. Self-made empty oil drum oil drain rack
1. Preparation materials: an empty oil drum (or plastic drum of the same size), art knife, scissors and lighter.
2. Dig several rectangular holes and a round hole for tableware in the oil drum with a utility knife, then cut off the bottle mouth of the oil drum and put it in the round hole.
3. Gently bake the just cut edge with a lighter to remove burrs. After baking, the edge will become harder and not easy to shake.
4. Put the tableware into our homemade drain rack and adjust the size.
Three, pencil homemade tableware drain rack
1, preparation materials: wooden pallet, pencil, electric drill, wooden pallet, it is best to have a small side, so that the water absorption is good, and water will not be spilled all over the tableware.
2. Draw the specific position of the hole position in parallel with a pencil at a certain distance on the board, and punch holes in the hole position with an electric drill.
3, insert a pencil, a DIY kitchen tableware drain storage rack is ready, when using, put the tableware and pencil together.