How to clean the blocked heater water tank?
The heater water tank is blocked. How to clean it? The gas storage tank is blocked. You can blow it with a high-pressure air gun and see if you can get through. Remove two pipes from the heating water pipe, and then connect them to the top of the heating water tank for air blowing. Although this method is simple, it can only be used if the water storage tank is blocked by soft sludge. It is recommended that the owner clean the heater water tank on time on weekdays. If it is broken, a new heater tank must be replaced, around 500 yuan.
In addition, the owner can also find a car wash shop, and then ask the repairman to remove the water inlet and outlet of the car's warm air box, and then use the high-pressure water gun of the car wash shop to wash it back and forth until the washed water becomes cold water. If there is a special type of cleaner, the original antifreeze of the car can be discharged and then cleaned with the cleaner. After cleaning, new antifreeze can be added.
Attachment: Daily cleaning method of warm air water tank
1. Prepare water tank cleaner, antifreeze, rubber gloves and crucian pliers. Fix the sewer pipe with crucian pliers, then screw the water inlet of the hot air tank, open the buckle and peel off the pipe.
2. Insert the nozzle of the high-pressure air pump into the water inlet of the heating tank, and turn on the air pump, so that high-pressure air will be blown into all the circulating system waterways, including the heating tank pipeline. With the entry of high-pressure air, the residual turbid water in the main cylinder will also be blown out.
3. Add cleaning agent, fill the water storage tank with oil and drinking water, start the car for 30 minutes, and turn on the warm air. This circulating system drains water three times. Before changing the water in the fish tank, use high-pressure air to make the pipeline unobstructed. Every ten minutes, the color of the discharged water becomes clear, and finally antifreeze can be added. Acura mdx3.7 fuel consumption and maintenance
Hello everyone, I am here to explain the fuel consumption and maintenance of Acura mdx3.7. Many people don't know the fuel consumption of Acura mdx3.7. Now let's take a look!
The fuel consumption per 100 kilometers of the 3.7l model is 14 liter.
Acura mdx is a medium and large suv under Acura.
Only the old models use a 3.7-liter naturally aspirated engine, and all the new models use a 3.0-liter naturally aspirated engine.
The wheelbase of the old mdx is 2750 mm, and its length, width and height are 4880 mm, 1990 mm and 1733 mm respectively.
The 3.7-liter naturally aspirated engine of Mdx has a maximum power of 227kw and a maximum torque of 370 Nm.
The maximum power speed of the engine is 6300 rpm and the maximum torque speed is 4500 rpm.
This engine is equipped with vtec technology and multi-point injection technology, and adopts aluminum alloy cylinder head and cylinder block.
Matching this engine is a 6at gearbox.
Using 6at gearbox can improve the fuel economy and shift smoothness of automobile.
The 6at gearbox has good reliability and durability.
The front of mdx adopts McPherson independent suspension, and the rear suspension adopts multi-link independent suspension.
Multi-link suspension can improve the ground performance of wheels, thus improving the grip of wheels.
The grip is improved and the handling of the car can be greatly improved.
Equipped with Mdx full-time four-wheel drive system.
For a car equipped with a full-time four-wheel drive system, the four wheels are always in a dynamic state, which can greatly improve the driving stability and handling of the car. How to clean the blocked heater water tank @20 19