How to add Baojun RC5 glass water? Filling position and capacity of Baojun RC5 glass water
1 water bottle
2 storage battery
3 Throttle
4 oxygen sensor
5 Brake tank
6 fuse box
7 Air cleaner element
8 Coolant tank
RC5 Glass Water Addition Procedure
1. Turn on the wiper switch, and the glass water will be sprayed out from under the front windshield.
2. When the wiper nozzle stops spraying water, open the glass water filler cap and add a small amount of newly prepared glass water.
3. Then turn on the wiper working knob to remove the residual old glass water.
4. When there is no more glass water sprayed from the water nozzle for the second time, fill about 4L glass water, and then cover it to complete the filling process.
Homemade glass water course
1. Preparation materials: detergent, purified water, 95% alcohol for medical use, and bottles with a capacity of more than 2L.
2. Pour 2L purified water into the bottle.
3. Then pour in about 500ml of alcohol.
4. Then put in 2 caps of detergent and mix with the solution. Washing powder is easy to block the glass spray hole and is not recommended. )
5, gently shake the bottle, make the solution fully integrated.
Adjustment method of glass water blending in different seasons
1, there is a lot of dust in summer, so the amount of detergent should be increased appropriately, but not too much, otherwise it will be easy to clean if there is too much foam.
2. The temperature is low in winter, and adding more alcohol can reduce the freezing point of the preparation solution. As long as 50-60% water and 40-50% alcohol are used, the freezing point of glass water can be reduced to -25 degrees Celsius, which can basically meet the needs of all parts of the country.