China Naming Network - Almanac query - How to control and cooperate the clutch, brake, gear and throttle when the car turns?

How to control and cooperate the clutch, brake, gear and throttle when the car turns?

At the beginning of the curve, enter the curve by the outside of the curve and drive by the inside of the curve in the middle, that is, when the vehicle reaches the top of the curve, it should drive near the inside of the curve, cut back to the outside of the curve after crossing the top of the curve, and drive out of the curve by the outside of the curve, that is, "outside-inside-outside".

Different corners:

Uphill curve: Before entering the curve, let the vehicle lean against the outside of the outside lane at a faster speed and enter the curve, then shift down by one or two gears, then choose a good route and correct the direction, while lightly stepping on the accelerator. After passing the top of the curve, you should cut back to the outside of the curve again. If it is safe, you can increase the throttle and leave the curve quickly.

Downhill curve: Before entering the curve, you should release the accelerator and step on the brake to greatly slow down the vehicle by one or two gears. Then you have to lean on the outside of the corner, slow down and enter the corner. Then you should release the brakes, choose a good route and correct the direction. After passing through the top of the curve, the vehicle should cut back to the outside of the outer lane, and at the same time, lightly step on the accelerator, and finally leave the curve quickly from the outside of the curve.

Dead ends. A dead corner is a corner where you can't see the exit. At this time, you can't see the traffic at the end of the curve, so you must slow down and drive in the curve of 10 trillion.

But we should also pay attention to avoid accidents with the opposite vehicles, so we should drive by the side of the road, along the outside of the curve when passing through the left curve, and along the inside of the outside road when passing through the right curve. Once you see the corner exit, you should change lanes in time and correct the reverse. According to the method of first outside, then inside and then outside, the throttle will accelerate the bend.

Extended data:

Precautions:

1, when turning, be sure to look in the rearview mirror and judge that no one is turning behind the good car or the side. This is often overlooked by many novices, which may easily lead to traffic accidents.

2. Turn left as far as possible. Because some vehicles will come out on the way you want to turn, in order to avoid obstacles or collisions, you should turn as far as possible.

3. Drivers must realize that they should turn on the small lights and anti-fog lights ahead as soon as possible, use speakers appropriately to attract the attention of pedestrians and other vehicles, move forward slowly, and be ready to brake and stop at any time.

4. For the uphill curve, before entering the curve, you should release the throttle, let the vehicle enter the curve at a faster speed by leaning against the outside of the curve, then lower it by one or two gears, then select the route and correct the direction, and at the same time, lightly step on the throttle, cut back to the outside of the curve after passing the top of the curve, increase the throttle after confirming that the road conditions are safe, and finally quickly drive out of the curve by leaning against the outside of the curve.