How to vent the air in the Chery Tiggo 3 water tank?

The way to vent the air from the Tiggo 3 water tank is to remove the water tank cover from the two heating pipes and the heater water tank, open the water tank cover, and add antifreeze from the heating pipe. The car water tank generally refers to the car radiator. The radiator belongs to the car cooling system. The radiator in the engine water cooling system consists of three parts: a water inlet chamber, a water outlet chamber, a main sheet and a radiator core. The steps to add water to the car water tank are as follows: 1. Turn the pressure cap counterclockwise. If you hear a hissing sound, wait until the sound disappears before opening it again; 2. Add an appropriate amount of coolant into the coolant expansion tank to reach the expansion tank between the MAX and MIN scales. 3. Start the engine with the coolant expansion tank cover open; 4. After starting the engine, the coolant in the tank will gradually decrease. At this time, add an appropriate amount of coolant to the expansion tank until the liquid level reaches the coolant level. The position between the MAX and MIN degrees of the expansion tank; 5. Reinstall the cap and ensure that the pressure cap is tightened by hand and fully seated.