How to turn on the heating of Volkswagen LaVida?
How to turn on the heating of Volkswagen LaVida?
First of all, you can find the air conditioning control button of the vehicle at the position shown in the cockpit. Then click the "Close" button on the air conditioning control button to start the vehicle air conditioning. Then click the empty button of the car empty key to turn off the cooling function of the car. Then, turn the air temperature setting knob to set the temperature at the required temperature, and then turn on the warm air of LaVida.
Volkswagen LaVida Hot Air Quick Heating Hot Air Open Mode Press the heating button. To cool the air, click the Cool button. The buttons are in the first row, from left to right, to adjust the cooling switch, the head blowing switch, the foot blowing switch and the front windshield switch, and the front windshield blowing switch. Automobile air conditioner is composed of compressor, condenser, throttling element, evaporator, fan and necessary control elements, which is used to adjust the temperature and humidity in the car and provide a comfortable environment for passengers. Ensure that the air quality in the car does not decrease (oxygen content decreases and pollution increases).
The internal and external circulation is controlled by the changeover switch. The car supports three setting modes: automatic mode, internal circulation and external circulation. The automatic mode is mainly based on the inner loop, and the outer loop is realized by timely switching control of air conditioning sensors. When the user turns on the air switch, the engine drives the compressor to start working, thus driving the refrigerant to circulate in the sealed air switch system. The compressor compresses gaseous refrigerant into refrigerant gas with high temperature and high pressure, and then discharges it from the compressor.
What is the reason why Volkswagen LaVida can't accelerate when climbing?
When climbing, is the gear too high to accelerate? When climbing a mountain, you should shift to a lower gear to climb it.
First of all, you should observe the speed of the engine tachometer when the acceleration speed rises slowly during normal driving. The difference in engine speed will distinguish two reasons. First, the engine tachometer rises slowly, which mainly reflects the engine power problem. There are many reasons for this problem; Second, the engine speed rises fast but the vehicle speed is slow, which can directly reflect the problems of clutch components. If you can't judge yourself, you can go to 4S for trial operation by professional maintenance personnel and carry out corresponding maintenance treatment.
If the engine is basically normal at no-load operation, but the acceleration is slow at load operation, the car can't go uphill. Step on the accelerator to the end, the power is still not enough, the speed is not high, and the maximum speed cannot be reached. The main reason for the failure is: 1. The air filter is clogged. 2. Due to improper adjustment, the throttle cannot be fully opened. 3. The fuel pressure is too low. 4. The fuel injector is blocked or poorly atomized. 5. The water temperature sensor is faulty. 6, air flow meter failure. 7. Improper ignition timing or weak high-voltage spark.
8. Engine compression pressure is too low. How does Volkswagen LaVida turn on the heating? What is the reason for the lack of acceleration when Volkswagen LaVida climbs the hill @20 19