Seamless wall coating laying preparation seamless wall coating laying steps

Wall cloth is a very common wall decoration material, which is usually attached to the walls of bedrooms and living rooms. A complete seamless wall covering can completely cover the wall, unlike wallpaper with splicing gaps, and keep it neat and complete. It may be easy to watch workers post wall covering. In fact, the paving preparation of seamless wall should be done well, and the installation details of real construction are also very difficult. It is not recommended to do it yourself, but you can learn about the preparation and steps of paving seamless walls.

For the wall treatment of seamless wall paving, the basic work of the wall should be done first. After the wall is cleaned, blow putty. After the putty is completely dried, use fine sandpaper to polish it smooth and flat. Pay attention to the details of the corner position of the wall. Brush the basement membrane after polishing, which can protect the wall surface and reduce the probability of the wall surface being damp. Moreover, the basement membrane can be sealed against alkali, and the original wall surface will not be damaged if the wall skin is replaced. When evenly coating the basement membrane, do not leave obvious marks. After drying, it shall be inspected by professionals, and the next step of construction can only be carried out after it meets the construction requirements.

Before construction, the prepared mixed glue for paving seamless wall shall be measured on the wall to check whether the quantity of goods is enough for paving. Chew according to the size of the wall covering. Generally, the ratio of glue to water is 5: 1. After standing for 5 minutes, add wet glue and stir until it is paste. Need to be prepared according to the thickness and type of wall covering.

Paving steps of paving preparation for seamless wall skin After the paving preparation in the wall skin is completed, the wall skin can be cut and pasted. Cut off the wall skin about 5cm longer than the wall surface, and brush the glue evenly on the wall surface. Pay attention to keep it clean when cutting, so as not to dirty the wall skin, and don't brush glue on the wall skin. Glue is the most important thing that wall covering sticks to the wall. Seamless wall covering should be pasted from the internal corner, and the edge of wall covering should be fixed on the wall. First, spread it vertically with a scraper, and then spread it horizontally. Always pay attention to whether it is flat and firm. After there are no bubbles, cut off the extra wall skin in the corner and paste it. Although wall covering can be repeatedly paved, repeated paving will cause wall covering to wrinkle, so try to paste it once.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~