How to adjust the spray nozzle of automobile windshield to spray?
It is not difficult to distinguish the injection modes. Press the spray button, the nozzle will spray water mist or water droplets evenly, and the spray area will be larger. Generally speaking, the spray nozzle is set before leaving the factory, and the angle is fixed. The water column is dispersed by the built-in nozzle, and even if one or two nozzle openings are blocked, the overall effect will not be affected, so this nozzle is not prone to problems.
Moreover, because the nozzles are all built-in, only a small groove can be seen from the appearance, so even if there is a problem, it cannot be solved by itself, and it must be repaired at a professional maintenance station.
Columnar adjustable.
The columnar water spraying form is that the left and right water spraying devices directly spray water columns, and the number of water nozzles of different vehicles is different. For example, Li Xia sprinkler has only one nozzle, Haval M2 has two, and Audi A4L has three.
Although the angle of the cylindrical water nozzle is also debugged before leaving the factory, this type of water nozzle is externally installed in the water spraying device, and the water nozzle can be seen by the naked eye, so the washing of the high-pressure water nozzle during daily car washing, the influence of thermal expansion and contraction caused by weather change, the deformation of the rotation angle caused by scale residue, and so on.
It may cause a slight change in the water spray angle, and even a slight change may cause a serious deviation in the water spray angle, so it is normal for some models to spray water easily.