What if the carpenter makes a mistake in making cabinets and doesn't change them?

Find the corresponding decoration company to negotiate or complain, but if it has been confirmed in the early stage that the drawings are not satisfied because of its own reasons, there is no way to complain.

In order not to rework the carpentry decoration, we can make the following preparations:

1. Pre-preparation: In order to ensure that the woodwork in the whole house is on the same level, it is necessary to carefully measure and play the chalk line before construction to determine the horizontal baseline of carpentry. After setting the horizontal line, the error in the vertical direction should be controlled within the allowable range, and the vertical direction of wood products must not be problematic.

2. Detailed dimensions: In carpentry, detailed dimensions and explanatory drawings are needed. At the time of disclosure, the designer will give the carpenter a detailed explanation to ensure a better decorative effect.

3. Material selection: In addition to measurement, woodworking construction will be strictly controlled from the material selection stage. Whether it is a wardrobe or a shoe cabinet, the door on the surface must be made of the same kind of plate to ensure the consistency of pattern color. After the wood products themselves are processed, they should be coated with a layer of white glue to avoid surface arching or cracks.

4. Other transformation: (1) When making the background wall, first lay the wooden keel, and then lay the gypsum board after inspection and confirmation. There must be a certain gap between the two gypsum boards, otherwise it is easy to bulge in the later stage; (2) In carpentry decoration, the veneering of door covers and wood products is the most important work. It is necessary to ensure that the 45-degree angle of the veneer is flat and even, and there will be no splayed cracks or the color of the substrate will be exposed. It is very important to treat the door cover base. After the door frame is completed, workers should carefully polish it with sandpaper to ensure that the surface of the door cover is smooth and flat, and then carry out veneer construction.