Five references of builder's work self-evaluation
Recommend more content related to the builder's self-evaluation.
Job responsibilities of the builder
Summary of personal annual work of builders: 5 articles.
What is the responsibility of the builder?
The builder's personal work plan
Six articles summarizing the personal work of the builder.
Self-evaluation of the builder's work 1
Time passed quietly. I have been working for almost a year. As a construction technician, I can gradually adapt to the pace and intensity of work at the moment. During this time, I deeply realized the responsibility of a construction technician, and at the same time realized my own shortcomings in my work. At this moment, I will make the following comments on my work during this period.
To join this project, first of all, the person in charge of the construction site said that although the construction site is highway maintenance, the engineering quantity is not large. Because I just came to the project, I am not familiar with the work of the whole project, and the communication with the construction team is not in place. The initial work is very passive. When I first arrived, my ambition was suddenly distorted by reality.
Lack of cooperation spirit, not good at actively communicating with colleagues, still unable to use the wisdom of the group to analyze and solve problems. It may be because I stayed in the project for a short time and had less contact with my colleagues. I feel a sense of strangeness and alienation. Because of my personality, I can't fully integrate into large groups. However, I believe that with the extension of time, the enhancement of self-team consciousness and the improvement of communication ability, this problem can still be solved quickly.
At work, constantly master methods and accumulate experience. I pay attention to the task as the traction, relying on post learning to improve, through observation, exploration, access to information and practical exercise, quickly complete the task. On the other hand, consult books and colleagues, constantly enrich knowledge and master skills. Under the guidance of the person in charge on duty at the scene, we constantly improved, gradually found out the basic situation of the work, found a breakthrough, mastered the basic level of the work, and entered the track of field investigation and data collation. For the internal industry, under the guidance of colleagues, there has also been a new leap. I broadened my professional knowledge step by step.
For construction workers, the ego should first master the daily work data, daily technical requirements and construction technology, so as to better handle it in the field management and coordination. The website is a place where one's skills are extremely tested. It is not only the mastery of technology, but also the management and coordination of the whole site at this moment. Especially when many processes cross, it is necessary to deal with related matters and avoid unnecessary troubles.
Coordinate the relationship between the parties involved in the construction, ensure that the construction quality is controlled and the project is promoted in an orderly manner, and firmly grasp the main personnel such as the technical director and quality management of the construction party. Supervisors participate in management, strictly control the project quality, control each working procedure in advance, reduce and reduce quality accidents, and try to do less or no rework. The important parts of each working procedure should be well known, strictly controlled, and supervision, inspection and acceptance must be in place.
The above is a simple evaluation in the project construction. In the next time, I will redouble my efforts, under the leadership of the company and the project department, constantly improve my comprehensive quality and innovate in the project construction. Under the careful training of company leaders, our technicians will grow rapidly and make due contributions to the development of the company.
Self-evaluation of construction workers II.
Time flies, and before I know it, I have been a construction engineer for _ _ years. I have been engaged in construction engineering since _ _ _ _, and have been working as a builder in the project department. I have been able to work as a builder independently for many years, so I get along well with the upper and lower managers of the project department and win trust. Recalling the busy work and harvest of the builder in recent years, the person in charge will make a brief evaluation of the annual work in recent years:
I. Project Quality Management
As engineers and technicians, they not only need a lot of professional knowledge, but also need necessary field experience and necessary business skills to lead and coordinate the team. I have benefited a lot from so many years of site quality management. Do a good job in pre-control to prevent and eliminate hidden dangers in construction. Before the project starts, be fully familiar with the construction drawings, participate in the activities of the blue prints.the design of the design institute, participate in the preparation of special construction plans and quality and technical disclosure cards in combination with the requirements of engineering practice and national quality acceptance specifications, and guide the shift workers seriously and responsibly.
Do a good job of supervision, find and correct the problems existing in the construction, conduct a comprehensive inspection of the project quality, and timely propose and correct the problems in the construction. Follow-up and check the construction process of special procedures to ensure that each procedure is qualified, cooperate with the civil technicians of the project department to patrol and solve various situations in the process of concrete pouring, and make timely rectification to ensure that the construction quality of each link reaches the standard. After my conscientious inspection and strict quality control, every construction link was praised by the company's leaders, and I also led the management staff of the brother project department to learn.
I evaluate and analyze the construction problems afterwards, so as to continuously improve the work. Every day after the construction, find out the problems that are easy to appear in the future and the merits in the construction process, and write them into the construction diary; Participate in weekly supervision meeting, project department meeting and monthly owner coordination meeting to evaluate how to work to ensure substantive results and continuously improve personal business level; Submit weekly and monthly reports to the company on time, seriously reflect the quality problems existing in the site and the problems that need to be solved by the company, and organically link the company with the project department.
Through my continuous learning, I have a clear understanding of all aspects of on-site construction. In Ibis Weifang Hotel project, I worked hard, gave up my personal rest time, carefully checked and managed, and corrected the problems existing in the construction in time. I made an important contribution to this project and was recognized and praised by Party A's supervisor.
Second, the preparation of the project completion figure
Be familiar with the actual construction data on site, and help the indoor team to sort out the change information (including the blue prints.the design problem, design change notice and engineering business contact list) into as-built drawings. As-built drawings can specifically reflect the traceability of actual construction data and provide a basis for future settlement and completion supply data.
Third, study hard and improve self-cultivation.
With the passage of time and the continuous improvement of technology, I feel that the lack of knowledge will affect the future work effect. I spend my spare time reading a lot of professional books, discussing and learning new technologies and inventions. At the same time, I drive other managers of this project department to learn professional knowledge together, starting from the basic knowledge, and let technicians learn new specifications, new standards and new technologies with me, so as to continuously improve their professional quality and let the construction force and technical force of this project department develop and grow together.
Fourth, deficiencies and improvements
In the future construction management. I also deeply understand the existence of successes and shortcomings. Therefore, in the future project management, I will continue to study seriously, learn modestly, improve my business and diplomatic skills, master deeper knowledge and technology, humanize the management of the project department, attach importance to the training of employees' skills, and have a good corporate atmosphere. I believe I will grow into a truly excellent engineer in the development family of the project department!
Self-evaluation of construction personnel's work 3
From an ignorant student who has just left school to a group of new Xingtai people, we have experienced a lot, paid a lot, learned a lot and matured a lot.
From the beginning of March when we first arrived there to the end of1February, from the basement construction of Guotai Business Plaza to the numerous towers now, although it is only a few short months, we have gained a lot during this time. I have met many friends, many "teachers", and most importantly, I have learned a lot of knowledge. From theory to practice, from being a man to doing things, I have gained a lot and felt deeply.
I remember when I first came here in March, I was still an intern. There were many people at that time, and there were nearly 20 interns. I remember telling myself at that time, "don't think about anything, stick to it, stick to it!" " Study, study! "Maybe I know too little about myself, and I feel that I have gained a lot every day, which is very fulfilling and practical. During this period, we have been following quality inspection, conducting construction and doing experiments, from "atlas, drawings, steel bars, templates and concrete" to "communication, coordination, management and block testing". Although I have done a lot, I don't think I am "browsing" or "the blind touch the elephant".
At the beginning of July, due to various reasons, many people who came in in the same batch left one after another, and they changed from internship to application. From the uncertainty of their previous positions to the formal assignment as builders, from the hardening of the site to the cleaning of the basement to the exercise of waterproofing, backfilling and post-pouring belt, I have a further understanding and understanding of the builder's position and have come into contact with more workers. I also evaluated some experience in getting along with front-line workers, that is, everyone is equal, don't pretend to be a small leader, don't disrespect workers, and learn to be "fickle" in management, and manage according to individual needs.
When t5 Tower started construction, I was lucky enough to become a full-time builder, with a heavy burden and a lot to learn. Because the experience is still immature and the construction consciousness is not in place, I still got a lot of help from Manager Chen. If I don't understand anything, I will write it down in my notebook, ask the person who will attend the meeting, and then drive him away. During this period, the following problems existed on site:
First, there were some technical problems with tower cranes in the early stage of the construction site. Some tower cranes read novels and listened to music irresponsibly while working, which led to the slow hoisting speed. After many times of issuing rectification notices and communicating with Zhao Ziwei, it has been improved. I think this situation will be eliminated in the next year. As soon as construction starts next year, a special meeting on tower crane management will be held for the tower crane company and the person in charge, and all the problems and possible scenarios at this stage will be explained clearly. The tower crane company that arrives late and leaves early will be punished.
Second, because the prophase labor service did not carry out the construction according to the construction plan and flow section we formulated and divided, the prophase construction period did not meet the expected requirements. On the one hand, the laborers misunderstood the division of the construction section and did not understand the convenience. On the other hand, the communication between labor managers and workers is not enough, and the leadership of workers is not enough. I think it is necessary to communicate with the labor service in advance when the skirt building is constructed in a large area next year, and there should be written documents, in addition, there should be the signature of the labor service management personnel and the name of the person in charge of the construction team, which is more binding on them.
Third, it is the problem of dragging the pump on site. Our concrete pump contract this year was a mistake. T5, the concrete is poured once every ten days on average, and our pump will cost tens of thousands of dollars a month to rent here. I think only one electric pump will be rented next year (the pressure of the electric pump is enough to meet the construction requirements), and the rest will be rented in t 1, t2 and T2. Manager Gao has a saying that I quite agree with him: everything must have a necessary "ha (ha) number", so in the later construction process, I focused my work on how to make rational use of limited resources, how to rationally divide the working face, how to improve the work efficiency of workers, and how to speed up the construction progress, shorten the construction period and complete the task with good quality and quantity while ensuring safety.
The job responsibilities of the builder hanging on the wall of our office include:
First, work under the direct leadership of the project manager, implement the policy of safety first and prevention first, do a good job in safety prevention according to regulations, implement safety work, ensure that safety must be emphasized in terms of efficiency and safety must be emphasized in production.
Second, be familiar with the construction drawings carefully, prepare various construction organization design schemes and construction safety, quality and technical schemes, and prepare individual project progress plans, manpower and material resources plans and machinery and equipment plans.
Third, compile and organize employees to hold meetings on schedule, study, make reasonable arrangements and give scientific guidance, and successfully complete all construction tasks of this project.
Four, cooperate with the project manager, earnestly fulfill the terms of the "construction contract", ensure the smooth progress of the construction, and safeguard the reputation and economic interests of the enterprise.
Five, the preparation of civilized construction site implementation plan, according to the general plan of the project construction site reasonable planning and layout, arrangement, implementation and creation of civilized construction site.
Six, the preparation of the total project schedule and monthly schedule and the monthly schedule of each construction team.
Seven, do a good job in the cost accounting of sub-item general contracting in time (according to the single item and sub-item), and inform the management personnel of the contracting department of the accounting results in time, so as to improve the construction plan and scheme in time and strive for higher benefits.
Eight, to each team issued a construction task book and material quota requisition. Cooperate with the project manager.
Nine, supervise and urge the construction materials and equipment to enter the site on time and be in a qualified state to ensure the smooth progress of the project.
Ten, to participate in the project completion center, responsible for the intact protection of the project.
Eleven, reasonable deployment of production factors, strict organization of construction, to ensure the progress and quality of the project.
Twelve, organize concealed engineering acceptance, participate in the quality evaluation of partial projects.
Thirteen, participate in the blue prints.the design and the preparation of the project schedule. I think it is very important to be familiar with the drawings and study the specifications, because the completion of the physical object depends on the guidance of the drawings, and the combination of the physical object can better deepen the impression. Our project department is a young team. Objectively speaking, we have our advantages and some shortcomings, but we have an excellent leadership team. Manager Gao, Manager Duan, Manager Yan, Manager Chen and Manager are excellent and experienced leaders. They have taught us many methods and many good ideas selflessly and unreservedly, and also gave us many good opinions and suggestions, which strengthened our confidence in the future. Take the cost analysis that our project department has been conducting, for example. It is not only a gain for us to let each of us personally participate in it, but also makes every link of project funds clear and clear, which is also a very good measure to control the overall capital cost. I also have some personal ideas and suggestions for my work in the coming year.
First, make a comprehensive assessment of the podium of each tower on a regular basis, including safety, progress, quality and cost. After objective and reasonable evaluation, scoring and necessary rewards and punishments, the managers of each tower can have the necessary sense of urgency, improve their sense of responsibility and stimulate their work vitality and enthusiasm.
Second, according to the key and key lines, find the right target and arrange the workers' jobs reasonably, and compare the construction progress and quality of the standard floor, analyze the reasons in time after the comparison, and formulate feasible methods.
Third, the cost analysis should continue and be more specific. Not just let the production managers report, but let them report the general aspects, and the person in charge will report the details again to see where the losses have occurred and how to avoid this from happening again. I've said a lot. In a word, I think the most important thing for people is not to look back on the past or look forward to the future. The most important thing for people is how to seize this moment, so that I can do better in my future work. I think I have the determination and the ability.
The builder's job self-evaluation 4
Since joining the work, I have abided by the rules and regulations of the company and the project department, listened to the work arrangement of the leaders, successfully completed the work tasks, safeguarded the honor of the group, raised my ideological requirements, responded to the call of the company, and conscientiously implemented the company documents and the spirit of the meeting. Work hard, work diligently, study relevant experimental knowledge seriously, and constantly enrich and improve yourself.
Looking back on the work of the past year, it was a busy and fulfilling year. What I learned in school textbooks is all theoretical knowledge. The practical experience accumulated bit by bit in my work at this moment is an inexhaustible wealth in my life. This year, there were difficulties and gains. As a result of serious work, I completed my personal duties and strengthened my skills. A brief evaluation of this year's work is as follows:
I. Politics and ideology
Dressed in a strong sense of ownership, I always pay attention to the development of the power construction company, personally think about the interests of the power construction company, the project department and the laboratory, firmly believe that the power construction company will continue to grow and develop, and be full of enthusiasm and expectation for the future of the power construction company. Although I haven't joined the China * * * production party yet, I will be strict with myself according to party member's standards, consciously understand the supervision and help of party member and my colleagues, and make unremitting efforts to overcome my shortcomings and make up for them, so as to stand the test in the long years to come and join the great China * * * production party as soon as possible.
I start from doing my job and daily work well, from me, from this moment, from the little things around me, and persevere. I will do my best and make unremitting efforts in my work. I will constantly improve my job skills, strive to master my job knowledge, be the backbone and expert of my job, and do my job in a down-to-earth manner.
Second, the work attitude
No matter at work or in life, I always believe that no pains are rewarded, so I have been working hard, studying hard and working hard. Love your job, be able to treat every job correctly and seriously, be dedicated to your job, get to and from work on time, make effective use of working hours and stick to your post. The construction period is tight, there are few people and many tasks. Can track the work, ensure that the inspection task is completed on time, and ensure the smooth inspection of the project. This shows that our testers have a strong sense of responsibility and carry forward the spirit of continuous work and hard work.
Third, job responsibilities
Conscientiously implement the national guidelines and policies on standardization, quality management system, product quality supervision and inspection and research and development; Really implement the relevant standards, testing methods and regulations of engineering products that this position is responsible for supervising and testing, and ensure that every test has laws to follow. Do a good job of understanding the entrustment list, project inspection, data and feedback, and do a good job of tracking the account for future reference. Due to many test items and different test time, the work should be done well in advance to avoid delaying the construction period and affecting the progress because the technical personnel of the construction unit do not understand the engineering test requirements and technical indicators. Our laboratory staff adhere to the four cardinal principles, carry out the quality policy, implement the quality objectives, abide by the rules and regulations, and serve the construction site wholeheartedly.
Fourth, specific work.
My job is mainly to test and inspect some civil engineering materials (cement, sand, stone, steel, brick, etc.). ) and finished products (steel weldments, concrete blocks, etc. ); Participate in concrete matching test; Supervise and control the mixing of concrete in the mixing station; Control site concrete and backfill soil, etc.
When I first joined the work, the first thing I came into contact with was the backfill inspection. Backfill soil is simple and boring, but most people think it's nothing but adding some soil. But after working for a period of time, it is not so simple: starting from the material requirements of the soil, compact the soil and set its control index; Which parts need to be backfilled and which parts need to be backfilled with sand or 3: 7 lime soil should be controlled by technical indicators; Selection of backfilling machines and tools; Whether the conditions before backfilling meet the requirements of underground concrete foundation strength, soil material selection, compactness requirements, virtual paving thickness and compaction coefficient have been determined, and backfilling compaction can not meet the requirements, which will cause landslides, subsidence and even bring greater harm. Therefore, it is not so easy to do anything in your mind until other materials that you gradually come into contact with are tested, and there is no room for ambiguity.
Contact more project tests in the laboratory one after another, define working procedures, form clear working ideas in specific work, and be able to carry out the work smoothly and complete the work skillfully and successfully.
Control of raw materials: each batch of raw materials entering the site must have the manufacturer's quality guarantee and inspection certificate, and each batch of raw materials must be inspected according to the specified quantity. (1) For cement, it is forbidden to mix cement of different manufacturers, varieties and labels when using bulk cement warehouse. When using bagged cement, protective measures should be taken to prevent cement from caking due to moisture. When using cement stored for more than three months, contact the laboratory in advance to conduct a second review of the actual label of cement. (2) Sand and gravel shall not contain foreign bodies, coal dust, etc. Especially those that are not mixed with white ash. If the raw materials are found to be inconsistent or abnormal with the samples, they should contact the laboratory in time and handle them. In order not to affect the construction progress, all incoming raw materials must be entrusted in time. The cement test adopts 3d strength and 28d strength, and the test report of steel, sand and stone should be issued within 24 hours after the laboratory understands the entrustment. All materials to be tested must be certified by the laboratory before they can be used. The principle of inspection before use, otherwise it will be regarded as nonconforming product. It is forbidden to be used in engineering.
Second, the control of backfill soil: before backfill soil construction, the construction department should fill in the backfill soil entrustment form truthfully and carry out the construction according to the requirements of design drawings. There is no requirement, according to national standards. The water content of soil material selected for backfill construction is the best. The paving thickness of each layer of backfill soil shall be compacted by layers according to the specifications, and shall not be rammed by leakage, and shall be accepted step by step. Only after passing the inspection can the next backfill be carried out, otherwise the construction unit will rework it.
(3) Concrete engineering. For concrete and mass concrete with special requirements, it should be entrusted in advance, and can be opened for identification after can opening. (2) Every time concrete is mixed in the mixing station, the mixture ratio should be strictly implemented, slump and workability should be controlled, and the mixing and production control records should be made. If the water content changes greatly, the laboratory should be informed in time to make dynamic adjustment. When using fly ash, environmental pollution should be avoided or reduced. The concrete test block is left in the mixing station, and the laboratory will assess the concrete production of the mixing station according to the concrete grade, batch and time produced by the mixing station to control the concrete production level.
For welders who enter the construction site for civil construction, their subordinate units must submit a copy of the welder's technical grade certificate and a list to the laboratory before the project starts. Before the start of the project, the welder should be tested for welding. After the test report is issued, the welder can carry out formal operation.
As soon as I joined the work, I quickly integrated myself into the work, constantly demanding myself and constantly urging myself to improve. As a young worker, I dare not neglect my work. I ask myself to write down the gains and losses in my work and the problems that appear every time to learn from them. If you encounter problems or difficulties in your work, you will consult with the general manager and leaders, listen to his opinions and suggestions patiently, and improve your work. Because my department only works in a small circle most of the time, I can't just sit back and wait. Frequent and irregular contact with the construction site to understand the engineering procedures and steps, so as to better serve the work in the future.
Verb (abbreviation for verb) Work achievement
I learned a lot at work and exercised myself. Through unremitting efforts, my work level has been further improved. In the first120th-day campaign of _ _ project, I was awarded "Personal Class II" by _ _ project department. In addition, with the mutual cooperation and collaborative efforts of other colleagues in the laboratory, my _ _ project civil engineering laboratory was awarded "group first class merit".
Abstract of intransitive verbs
Although I have made some small achievements this year, there is still a big gap between the trust and expectation of the company and the superior leaders. In the future work, I will work harder, constantly improve my professional and technical level, and better complete the tasks assigned by the leaders. Broaden our thinking, deepen and refine our own work, and strive to make greater contributions to the powerful iron army of Power Construction Company.
Self-evaluation of construction personnel's work 5
The work in the first half of the year has been completed. According to the actual situation of my work, I analyze and evaluate my own work, evaluate my own experience and lessons, and put forward improvement methods, so as to foster strengths and avoid weaknesses in my future work and provide a basis for continuously improving my working methods and improving my work efficiency in the future. As a technician, I will position my job as assisting the technical director and constantly enrich myself. In the process of participating in the construction project and completing the project,
At the same time of construction survey and setting out, it also assists the technical director in preparing the construction scheme and technical disclosure, and is responsible for the guidance and collation of engineering technical data, carries out on-site quality inspection together with the builder, and assists the safety officer in implementing, supervising and checking the safety work on the construction site. In the process of engineering construction, I always take my work seriously with an enterprising attitude. In order to complete the task successfully, I can do my duty in all the work. "Don't rush to make achievements, bury your head in work" is my work motto, reminding yourself not to aim too high, to be down-to-earth, to do more practical things, to test your knowledge in practice and to accumulate experience in the construction site. The work on the construction site made me deeply understand that what I learned in school, what I learned by rote through norms and procedures, is far from being solid with actual experience. A lot of knowledge can't be learned in books, and it is entirely based on my own experience.
In the past year, I have been reading and studying more. When you encounter something different from books on the construction site, consult the technical director and foreman humbly in time. Although sometimes I can't get a theoretical explanation, it's a good experience. When I first started working, I felt that the technical data work, measurement work and quality inspection work were relatively simple, but I actually learned a lot. I have always felt that I am self-sufficient, but I found my own shortcomings in actual operation, which is often half the effort and inefficient. At this time, the actual operation is much more, the methods are mastered, and the experience is accumulated, so it is handy. For example, in measurement, it is important to do its key work well. Personally, the key work of measurement is to choose the best measurement scheme, and to carry out retest to avoid human error. In addition, taking the technical disclosure work as an example, it is not simply handed over to the labor construction team for signature after the disclosure. However, after the written disclosure is completed, the workers need to be tracked and inspected in the actual construction process. If it is found that the workers have not carried out the construction according to the technical disclosure or not completely, they should be patiently explained and guided to make the partial projects in place, avoid rework, and ensure the construction progress and project quality. In engineering construction, safety is the main link that cannot be ignored. Based on the practical experience in the construction site in the past year, this paper briefly talks about safety issues.
The most important thing is to establish a sense of security. First of all, the managers of the project department must have a strong sense of safety and responsibility. Only when the managers of the project department truly realize the importance of safety can they do this job well. If the management of the project department is lucky enough to do this work, it will be a fatal hidden danger for the safe construction of the project. Therefore, the project manager must understand the safety work from the bottom of his heart and put it into practice. For the labor service team, the first thing to do is to arrange a safety education and training after the workers enter the site, and at the same time make safety technical disclosure to the labor service construction team. These tasks will not be implemented until they are done. The management personnel of the project department should always check the safety work on the construction site, and strive to completely eliminate potential safety hazards in the bud. In terms of safety, special attention should be paid to the support of the frame and the safety facilities carried or worn by the workers themselves. Regularly supervise and check that workers must wear safety facilities before they are allowed to work on the construction site. In the process of erection of scaffolding, strict inspection must be carried out, and the construction team is required to set up facilities in strict accordance with construction specifications or procedures to ensure that there are no potential safety hazards, and the next working procedure can only be carried out after the acceptance of relevant departments.
This half-year project construction work has made my professional knowledge grow and deepen, and my work skills, including organization and coordination ability, management ability and contingency ability, have been greatly improved. More importantly, I have accumulated valuable work experience. The work performance in the past six months has also been recognized by the leaders and colleagues of the project department. In short, in my future work, I will meet new challenges with a hundred times enthusiasm, improve and mature in my study, constantly motivate myself, enrich my energy, improve my quality and professional level, so as to adapt to the development of the times and enterprises and improve and grow together with the company. Contribute to the development of Xingtai Group in Inner Mongolia.
The builder's job self-evaluation (five articles) related articles:
Taken the builder's work self-evaluation five articles
★ Self-evaluation of the builder's resume
★ Self-evaluation of job seekers of builders.
★ Five articles on self-evaluation of engineering work
★ Five references for self-evaluation of engineering work
★ 20 12 model essay on self-evaluation of construction workers' job hunting
★ Model essay on self-evaluation of construction workers' job hunting
★ Self-evaluation of the construction engineer's resume.
★ 202 1 Self-evaluation of the builder's personal job search
★ Model essay on personal job search and self-evaluation of builders
var _ HMT = _ HMT | |[]； (function(){ var hm = document . createelement(" script ")； hm.src = "/hm.js？ F3 deb 3 e 38843798 ce 8b 6783 fc 0959 c 85 "； var s = document . getelementsbytagname(" script ")[0]； s.parentNode.insertBefore(hm，s)； })();