What kinds of outdoor tiles are there and how to lay them?
What kinds of outdoor tiles are there?
Cement floor tile: this kind of floor tile is not as smooth as other tiles, with rough texture and poor color. It is often used for outdoor decoration, but this kind of floor tile is easy to hide dust. If it is not cleaned for a long time, it will give people a gray feeling. This kind of floor tile is often used for the decoration of squares and lawns.
Brick: Brick can be subdivided into ordinary brick, roof brick and indoor supermarket brick.
Blind road brick and stop brick: generally yellow, gray and black. Because of its superior anti-slip, wear-resistant and decorative aesthetic properties, it is widely used in leisure squares, municipal engineering, supermarkets, 4S shops, landscaping, beautiful roofs, garden balconies and crowded public places. It has the characteristics of non-slip, wear resistance, beauty and convenient maintenance, and is an ideal floor and roof decoration material for modern urban construction.
Lawn brick: Lawn brick can be prefabricated into various specifications and colors, inlaid with various patterns and assembled into different patterns as required, which is more beautiful than cement floor, and can reduce glare caused by ground reflection, reduce the reflection of ground radiation and reduce the transmission of hot air at the bottom. Lawn brick is widely used in urban road reconstruction, park construction, community greening and so on.
How to lay outdoor tiles?
Outdoor floor tiles should be pre-selected for specifications, dimensions, appearance quality and color before paving, cleaned, soaked in clear water, taken out and dried in the shade before use. The time of drying in the shade is generally about half a day, which is subject to the fact that there is no water film on the surface of the brick and there is a sense of humidity. ? On the cleaned leveling layer, find out the ground elevation, level it with a spirit level, and pop up a horizontal line; And the edge position is pre-assigned. ? When laying floor tiles, first use waste bricks as sign blocks, and make a sign block every 1.5 meters horizontally, and use stay wires to correct the flatness. Bricklaying on the ground should start from the Yang angle.
1:2.5 cement mortar paving. In order to improve the workability of mortar and make it easy to operate, lime paste with dosage not more than 0/5% of cement/kloc can be added. Apply 5 ~ 6mm thick knife ash on the back of the roof brick with a shovel. The dosage of mortar shall be subject to the fact that it is just filled with mortar after paving. 1 line: after laying and correcting, translate guy, and lay in turn according to the previous method. When the shop is stuck, pay attention to keep it flat with the adjacent roof tiles. If the specifications, sizes or geometric shapes of roof tiles are different, they should be adjusted at any time when paving to make the gap width consistent. After the shop is laid, quality inspection should be carried out, and the surface of the brick should be scrubbed clean with clear water. Joints and pressure joints shall be closely caulked with cement slurry of the same variety, strength grade and color. After all the work is finished, rinse with clear water.
In today's content, we mainly introduce the types of outdoor tiles for you, because everyone is more concerned about what kinds of outdoor tiles there are, so in the first part of the article, we listed four common types of outdoor tiles. In fact, in this article, we not only mentioned the types of outdoor tiles, but also introduced the laying methods of outdoor tiles in detail. In order to create a better effect, everyone should know about it before laying.