How to adjust the speed of the cylinder?

1. The rotational speed of the cylinder can be realized by adjusting the intake air flow, such as regulating valve and throttle valve.

2. If different speeds are needed, it can be realized by using multiple gas paths.

3. Multi-channel air path control combined output can realize various cylinder speeds.

A cylindrical metal part that guides the piston to do linear reciprocating motion in a cylinder. The working medium expands in the engine cylinder to convert thermal energy into mechanical energy; The gas is compressed by the piston in the compressor cylinder to increase the pressure. The casing of a turbine, rotary piston engine, etc. Also commonly referred to as "cylinder". Application fields of cylinder: printing (tension control), semiconductor (spot welding machine, chip grinding), automation control, robot, etc.

The thrust and tension on the piston rod are determined according to the force required for the work. Therefore, when selecting the cylinder, the output force of the cylinder should be slightly to the left. If the cylinder diameter is small and the output force is not enough, the cylinder cannot work normally; However, the cylinder diameter is too large, which not only makes the equipment cumbersome and costly, but also increases gas consumption and causes energy waste. When designing the fixture, the booster should be used as much as possible to reduce the size of the cylinder.